Comparative Analysis of the Use of Pasir Pantai Cermin and Deli River Sand as Fine Aggregates on the Compressive Strength of Normal Concrete
DOI:
https://doi.org/10.35134/jcivil.v10i2.98Keywords:
compressive strength, K-250 concrete, sand beach, river sandAbstract
River sand remains the primary fine aggregate used in concrete, while beach sand—though abundant along the coast of North Sumatra—is rarely utilized due to concerns regarding salt content and impurities. This study compares the compressive strength of K-250 grade normal concrete (with a target $f'_c$ of 21.7 MPa) using either Pantai Cermin sand (washed three times) or Deli River sand as the sole fine aggregate (100% replacement). Mix proportions were determined in accordance with SNI 7394:2008, utilizing a water-cement ratio of 0.56, the same type of composite Portland cement, and a consistent slump of 12 cm for both variations. Three 15 × 30 cm cylinders for each variation were tested at 7 and 14 days, with results subsequently converted to 28-day equivalent values using the age-conversion factors from PBI 1971. The average 28-day equivalent compressive strength was 18.23 MPa (84.0% of the target $f'_c$) for the river sand and 11.17 MPa (51.5%) for the beach sand, with a difference of 6.83 MPa at 7 days and 7.30 MPa at 14 days. Neither variation reached the target design strength. As the 28-day values are estimates, it is recommended that direct 28-day testing, comprehensive sand characterization, and chloride content analysis be conducted before considering beach sand for use in structural concrete.
References
Moini, M., Flores-Vivian, I., Amirjanov, A., & Sobolev, K. (2015). The optimization of aggregate blends for sustainable low cement concrete. Construction and Building Materials, 93, 627–634. https://doi.org/10.1016/j.conbuildmat.2015.06.019
Laia, I. S. R., & Nurmaidah, N. (2024). Analisis kuat tekan beton terhadap penggunaan agregat halus (pasir) sungai Suani Kecamatan Bawolato mutu beton K-250. Jurnal Teknik Sipil, 2(2), 231–235. https://doi.org/10.30743/jtsip.v2i2.8821
Kirthika, S. K., Singh, S. K., & Chourasia, A. (2020). Alternative fine aggregates in production of sustainable concrete – A review. Journal of Cleaner Production, 268, 122089. https://doi.org/10.1016/j.jclepro.2020.122089
Xiao, J., Qiang, C., Nanni, A., & Zhang, K. (2017). Use of sea-sand and seawater in concrete construction: Current status and future opportunities. Construction and Building Materials, 155, 1101–1111.
Zhao, Y., Hu, X., Shi, C., Zhang, Z., & Zhu, D. (2021). A review on seawater sea-sand concrete: Mixture proportion, hydration, microstructure and properties. Construction and Building Materials, 295, 123602.
Ebead, U., Lau, D., Lollini, F., Nanni, A., Suraneni, P., & Yu, T. (2022). A review of recent advances in the science and technology of seawater-mixed concrete. Cement and Concrete Research, 152, 106666. https://doi.org/10.1016/j.cemconres.2021.106666
Dumyati, A., & Manalu, D. F. (2015). Analisis penggunaan pasir pantai Sampur sebagai agregat halus terhadap kuat tekan beton. FROPIL (Forum Profesional Teknik Sipil), 3(1), 1–13.
Siswanto, R., Suyoso, H., & Hayu, G. A. (2017). Pengaruh penggunaan pasir pantai sebagai agregat halus dan cangkang kerang sebagai substitusi parsial semen terhadap kuat tekan beton. Jurnal Rekayasa Sipil dan Lingkungan, 1(2), 192. https://doi.org/10.19184/jrsl.v1i02.6895
Sudirman, S. (2024). Pengaruh penggunaan pasir pantai Amassangan terhadap kuat tekan beton. Jurnal Ilmiah Ecosystem, 24(1), 149–160. https://doi.org/10.35965/eco.v24i1.4189
Maulana, M. R., Tanjung, D., & Hasibuan, M. H. M. (2024). Analisis penggunaan pasir Pantai Pondok Permai di Kecamatan Pantai Cermin Kabupaten Serdang Bedagai sebagai agregat halus terhadap kuat tekan beton. Konstruksi: Publikasi Ilmu Teknik, Perencanaan Tata Ruang dan Teknik Sipil, 2(2). https://doi.org/10.61132/konstruksi.v2i2.227
Andriani, D., Yusina, M. T., & Awalia, N. A. (2024). Analisis penggunaan pasir pantai Pelabuhan Ratu sebagai agregat halus terhadap kuat tekan beton. Jurnal Rekayasa Teknologi Nusa Putra, 10(1), 14–22. https://doi.org/10.52005/rekayasa.v10i1.559
Devanka, G. P., Jamaludin, J., & Zain, A. (2024). Analisis perbandingan kuat tekan beton menggunakan pasir silika, pasir sungai Kampung Putra Buyut Kecamatan Gunung Sugih, dan pasir pantai M-Beach Kecamatan Kalianda. Inovasi Pembangunan: Jurnal Kelitbangan, 12(3).
Hasan, N., Mustakim, M., & Fadly, I. (2024). Analisis pengaruh pasir pantai Wahede Kabupaten Barru terhadap kuat tekan dan kuat tarik belah beton. Sultra Civil Engineering Journal, 5(2), 330–340. https://doi.org/10.54297/sciej.v5i2.657
Badan Standardisasi Nasional. (2008). SNI 7394:2008 Tata cara perhitungan harga satuan pekerjaan beton untuk konstruksi bangunan gedung dan perumahan. BSN.
Badan Standardisasi Nasional. (2022). SNI 1972:2022 Metode uji slump beton semen hidraulis. BSN.
Badan Standardisasi Nasional. (2023). SNI 1974:2023 Metode uji untuk kekuatan tekan spesimen beton silinder. BSN.
Departemen Pekerjaan Umum. (1971). Peraturan beton bertulang Indonesia (PBI 1971). Yayasan LPMB.
Neville, A. M., & Brooks, J. J. (2010). Concrete technology (2nd ed.). Pearson Education Limited.
Sang, N. T., Quan, T. M., Dang, V. Q., Ho, L. S., & George, R. C. (2022). Applicability of concrete containing the binary and ternary system of binder materials under natural marine environment. Journal of Applied Science and Engineering, 25(5), 881–891. https://doi.org/10.6180/jase.202210_25(5).0019
Sindhurashmi, B. M., Nayak, G., Adesh, N. D., Dubey, S. P., & Rao, V. (2024). Mock-up pragmatic study on the impact performance of self-compacting concrete incorporating sea sand. Scientific Reports, 14(1), 1–26. https://doi.org/10.1038/s41598-024-75613-9
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Civil Engineering Collaboration

This work is licensed under a Creative Commons Attribution 4.0 International License.


CEC has launched a new template since 7 No. 2 (2022)


