Perencanaan Ulang Pondasi Pilar Jembatan Sikabu Kayu Gadang
DOI:
https://doi.org/10.35134/jcivil.v6i2.30Keywords:
Bridge, Foundation, Bearing , Capacity, ReinforcementAbstract
The construction of transportation facilities such as bridges plays an important role in the development of human resources today because more and more road users will use these facilities. The Sikabu Kayu Gadang Bridge has a span of 100 meters with a structure of precast concrete, abutments, pillars and a foundation of concrete and steel piles which inspired the authors to conduct research. In this type of selection, several things need to be considered, such as the load being carried and the location of the hard ground. Based on this, this study aims to analyze the deep foundation that can be applied to the project in the hope of getting more efficient results. Based on the re-planning, the bearing capacity of the foundation permit (Qall) is 1254.98 kN with a diameter of 0.5 m and a depth of 20 m. The permitted bearing capacity of the pile group (Qall) is 12795.46 kN to withstand the loads acting on the superstructure. Bore Pile foundation logitudinal reinforcement = 10 D16 and Bore Pile shear reinforcement = ᴓ 12 – 150 mm.
References
BMS. (1992). Bridge Design Manual Volume 1. Directorate General og Highways Ministry of Public Works Republic of Indonesia.
BMS. (1992). Bridge Design Manual Volume 2. Directorate General og Highways Ministry of Public Works Republic of Indonesia.
Bowles, Joseph E.(1993) Analisa dan Desain Fondasi Jilid I dan II. Jakarta : Erlangga.
Darwis. (2018). Dasar-dasar Mekanika Tanah. Yogyakarta : Pena Indis.
Das, Braja M. (2007). Principles Of Foundation Engineering. United Kingdom : Cengange Learning
Direktorat Jendral Bina Marga. Petunjuk Teknis Pengujian Tanah. Kementrian Pekerjaan Umum Dan Perumahan Rakyat.
Erny Harianti & Anugrah Pamungkas.(2013). Desain Pondasi Tahan Gempa. Yogyakarta : Penerbit Andi
Hakam, Abdul. (2008). Rekayasa Pondasi. Padang : CV Bintang Grafika.
Ilham, M Noer. (2008) Analisis Fondasi Pier.Yogyakarta : MNI-EC
RSNI T-02(2005). Standar Pembebanan Untuk Jembatan. Badan Litbang Departemen Pekerjaan Umum.
RSNI T-12. (2004). Perencanaan Struktur Beton Untuk Jembatan. Badan Strandarisasi Nasional.
Setiawan, Agus. (2016). Perancangan Struktur Beton Bertulang. Jakarta : Erlangga
SNI 03-2847(2002). Tata Cara Perhitungan Struktur Beton Untuk Bangunan Gedung. Bandung
SNI 2847.(2013). Persyaratan Beton Struktural Untuk Bangunan Gedung. Jakarta: Gd. Manggala Wanabakti