HIRADC Analysis for Rolling Stock Body Lifting Ngrombo Railway Maintenance Center
DOI:
https://doi.org/10.35134/jcivil.v8i2.59Keywords:
HIRADC, safety, Building, Maintenance, Rolling Stock, RailwayAbstract
The Railway Maintenance Center as stated in the Regulation has the duty and function of carrying out the maintenance of state-owned railway facilities. The part of rolling stock heavy maintenance with high potential hazard is Lifting Body Activities Using OHTC in Maintenance of Hydraulic Diesel Locomotive Facilities activity. it so there is a need for a risk assessment which is a process to determine control priorities for the level of risk work accident or occupational disease. Part of OHSAS 18001:2007 Clouse 4.3.1. recommendation HIRADC methode for can support a safety system with 3 stage analisys (hazard identification, risk assessment, and control determination) The Hazard Identification results obtained 3 aspects of hazard risk in OHTC Rolling stock Body Lifting operations with the following analysis results Crane toppling, Equipment failure, Load falling with Death & asset / property damage impact factor. Risk Assessment analisys of Rolling stock Body Lifting using OHTC obtained results action taken when resources are available regarding handling which in general were Administrative Control. Determine Control relevant steps to minimize potential hazards immediately (1) Evaluating SOP Rolling stock Body Lifting and conduct outreach to all employees related to the work, (2) Making and or adding hazard signs and (3) Human development by conducting Training/Refreshment Crane Operator and Signal man. (4) Strictness of the rules for using PPE for all employees related to the work as the last step in minimizing the risk of occupational hazards.References
Tjahjono Soerjanto, dkk. (2021). Buku Statistik Investigasi Kecelakaan Transportasi (KNKT). Jakarta :Pelayanan Investigasi dan Kerjasama Bagian Data, Informasi dan Humas Komite Nasional Keselamatan Transportasi
Dinmohammadi, F., Alkali, B., Shafiee, M., Bérenguer, C., & Labib, A. (2016). Failure mode, effects and criticality analysis of railway rolling stock assets. In J. Pombo (Ed.), Proceedings of the 3rd International Conference on Railway Technology: Research, Development and Maintenance: Civil-Comp Proceedings (CCP: 110) [256] (Civil-Comp Proceedings; Vol. CCP: 110, No. 256). Civil-Comp Press. https://doi.org/10.4203/ccp.110.256
Sekretariat Negara, (2009). Peraturan Pemerintah No. 56 Tahun 2009 tentang Penyelenggaraan Perkeretaapian. Lembaran Negara RI Tahun 2009, No. 56. Jakarta: Republik Indonesia.
Kementerian Perhubungan (2014) Peraturan Menteri Perhubungan Republik Indonesia Nomor 65 Tahun 2014 Tentang Organisasi Dan Tata Kerja Balai Perawatan Perkeretaapian. Jakarta: Kementerian Perhubungan Republik Indonesia.
Kementerian Perhubungan (2019) Peraturan Menteri Perhubungan Republik Indonesia Nomor PM 18 Tahun 2019 Tentang Standar Tempat dan Peralatan Perawatan Sarana Perkeretaapian Jakarta: Kementerian Perhubungan Republik Indonesia.
Grenčík J, Poprocký R, Galliková J and Volna P (2018). Use of risk assessment methods in maintenance for more reliable rolling stock operation. MATEC Web of Conferences 157, 04002
https://doi.org/10.1051/matecconf/201815704002
Peláez, G.; Vaugan, J.; Izquierdo, P.; Rubio, H.; García-Prada, J.C. (2018) Dynamics and embedded Internet of Things input shaping control for overhead cranes transporting multibody payloads. Sensors , 18, 1817
https://doi.org/10.3390/s18061817
Asosiasi Ahli Keselamatan Dan Kesehatan Kerja Konstruksi Indonesia (2018) K3 Alat Angkat Dan Angkut. Jakarta: Departemen Pendidikan Dan Pelatihan A2K4 Indonesia
Kementerian Tenaga Kerja (2020) Permenaker No. 8 Tahun 2020 tentang Keselamatan dan Kesehatan Kerja Pesawat Angkat dan Pesawat Angkut. Jakarta
British Standards Institute (2007) OHSAS 18001. (2007). Occupational Health and Safety Management System Requirements.
Khrisna OB, Maiti J, Ray P K, Samanta B, Mandal S, Sarkar S (2015) Measurement and Modeling of Job Stress of Electric Overhead Traveling Crane Operators. Safety and Health at Work Journal 6(4), 279-288
https://doi.org/10.1016/j.shaw.2015.06.005
Nitsche CI. Promoting safety culture: An overview of collaborative chemical safety information initiatives. J. Chem. Health Safety (2019),
https://doi.org/10.1016/j.jchas.2018.12.004
Ihsan, T., Hamidi, S. A., & Putri, F. A. (2020). Penilaian Risiko dengan Metode HIRADC Pada Pekerjaan Konstruksi Gedung Kebudayaan Sumatera Barat. Jurnal Civronlit Unbari, 5(2), 67.
https://doi.org/10.33087/civronlit.v5i2.67
Alexander, H., Nengsih, S., & Guspari, O. (2019). Kajian Keselamatan dan Kesehatan Kerja ( K3 ) Konstruksi Balok Pada Konstruksi Bangunan Gedung. Jurnal Ilmiah Poli Rekayasa, 15(1), 39
https://doi.org/10.30630/jipr.15.1.140
Hidayat, D. F., & Hardono, J. (2021). Penerapan Metode HIRADC pada Bagian Proses Penerimaan di PT. CA. Journal Industrial Manufacturing, 6(2), 87
https://doi.org/10.31000/jim.v6i2.4992
Ihsan, T., Edwin, T., & Irawan, R. O,(2017) Analisis Risiko K3 Dengan Metode Hirarchy Pada Area Produksi PT Cahaya Murni Andalas Permai, Jurnal Kesehatan Masyarakat Andalas, 10(2), 179–185.
https://doi.org/10.24893/jkma.10.2.179-185. 2016.
Zomer, Jordi & Bešinović, Nikola & Weerdt, Mathijs & Goverde, Rob. (2021). The Maintenance Location Choice Problem for railway rolling stock. Journal of Rail Transport Planning & Management. 20. 100268. http://dx.doi.org/10.1016/j.jrtpm.2021.100268
Wagenaar, Joris & Kroon, Leo & Schmidt, Marie. (2017). Maintenance Appointments in Railway Rolling Stock Rescheduling. Transportation Science. 51. http://dx.doi.org/10.1287/trsc.2016.0701
Dinmohammadi, Fateme. (2019). A risk-based modelling approach to maintenance optimization of railway rolling stock: A case study of pantograph system. Journal of Quality in Maintenance Engineering. 25. http://dx.doi.org/10.1108/JQME-11-2016-0070
Mohamad Idris, Ir. Dr. Mohd Firdaus & Saad, Nor & Yahaya, Mohamad & Shuib, Adibah & Mohamed, Wan & Amin, Ahmad. (2022). Cost of Rolling Stock Maintenance in Urban Railway Operation: Literature Review and Direction. Pertanika Journal of Science and Technology. 30. 1045-1071. 10.47836/pjst.30.2.11.
Yusupov, Aziz & Boltayev, Sunnatillo & Khudayberganov, Sakijan & Toxtakxodjaeva, Mafirat. (2023). Improvement of accident prevention measures in cases of spontaneous derailment of railway rolling stock. E3S Web of Conferences. 365. 05010. 10.1051/e3sconf/202336505010.
Mohammad Ikrar Pramadi, Hadi Suprapto, & Ria Rahma Yanti. (2020). Pencegahan Kecelakaan Kerja Dengan Metode Hiradc Di Perusahaan Fabrikasi Dan Machining. JENIUS : Jurnal Terapan Teknik Industri, 1(2), 98-108.
https://doi.org/10.37373/jenius.v1i2.60
Badan Standardisasi Nasional (2020), Manajemen risiko – Teknik Penilaian Risiko ISO 31010:2019. Jakarta: Badan Standardisasi Nasional.
Szrama S (2017) HAZARD Identification Process Implementation In Selected Analysis Domain Of The Maintenance System Of The Multirole F-16 Aircraft
DOI 10.21008/j.2449-920X.2017.69.2.08
Ramli, Soehatman. (2010). Pedoman Praktis Manajemen Risiko Dalam Perspektif K3 OHS Risk Management. Jakarta : Dian Agung.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Civil Engineering Collaboration
This work is licensed under a Creative Commons Attribution 4.0 International License.
CEC has launched a new template since 7 No. 2 (2022)
